How To Install Windows 11 on Windows 10 For Free

How To Install Windows 11 on Windows 10 For Free


How To Install Windows 11 on Windows 10 

Microsoft announced Windows 11 on June 24. But before that, it was understood what was coming with the new operating system. An experimental version of the new Windows (Beta Dave version build 21996.1) was leaked in mid-June. Many users find it and install it on their computers. Don't worry, no need to do so much panic. You can easily download and install a free trial version of Windows 11 (Beta Dave version build 22001.51) from the windows setting on your computer.

Let's do that today. Know how to update from Windows 7 or 10 to the official beta of Windows 11.

Make sure to back up the necessary information on the computer where you want to install it.

The minimum required on a computer to install Windows 11

  • 1 GHz or higher processor
  • At least 4 GB of RAM
  • 64 GB free storage
  • Must have TPM 2.0 chip and system firmware must be in UEFI mode

In many cases, Windows 11 cannot be installed even on a high configuration computer. This section or article needs valid sources or references that arrive at incredible, third-party publications. Most of the users are facing the problem with TPM 2.0 mainly. Press the Win + R button on your current Windows operating system PC to see if this TPM chip is on your PC.



How To Install Windows 11 on Windows 10 For Free

Type ‘tpm.msc’ and press Enter or click the OK button when the Run interface appears. The interface will look like the picture below  If you have a TPM chip on your PC.

How To Install Windows 11 on Windows 10 For Free



The interface will show below if there is no TPM chip.


How To Install Windows 11 on Windows 10 For Free


Most users have a TPM chip on their PC, but Windows 11 will not work on their PC. In this situation, the version of TPM chip has to be updated.

First, check your PC's Device Manager to make sure you have a TPM chip. To do this, press the Win + R button again. Type the command 'devmgmt.msc' and press Enter when the Run interface appears.


How To Install Windows 11 on Windows 10 For Free


Now you will see the TPM chip in the Security Devices tab. You need to activate TPM chip from BIOS if the command tpm.msc does not show your TPM chip but shows TPM chip in Device Manager.

To activate TPM chip from BIOS Restart your PC. When turned off, enter the BIOS by pressing the F2 button (depending on the manufacturer, F10, F2, F12, F1, or DEL key). Then go to the Security, Advanced, or Settings options, enter the Miscellaneous section and turn on Intel Platform Trust Technology (PTT) to save.

Now go to the boot menu, then activate the secure boot option and restart the PC with 'save and exit' it.

You can download and install the TPM chip driver according to your model from the website of your motherboard brand If it still shows a bad message about TPM. If the installation shows the same model already installed, go to tpm.msc from the run interface and clear TPM.


How To Install Windows 11 on Windows 10 For Free

Now your PC will restart in few seconds, after restarting then again go to tpm.msc and click on Prepare the TPM or Setup TPM.

How to install Windows 11 if you do not get TPM chip 

First, start the run by pressing the Win + R buttons and give the command ‘regedit’. Now go to HKEY_LOCAL_MACHINEYSTEMetup then right-click on Setup and select New> Key.


How to install Windows 11 if you do not get TPM chip


After that press Enter with the file name ‘LabConfig’.


How to install Windows 11 if you do not get TPM chip


Now you should need to right-click the mouse on LabConfig then select New> DWORD (32-bit) value to create and now create another value ‘BypassTPMCheck’, and set its data to ‘1’. Now create the BypassRAMCheck again and BypassSecureBootCheck value and set the data to ‘1’ so that its look like the image below.



How to install Windows 11 if you do not get TPM chip

Close the registry editor. Now your PC is ready to boot into Windows 11.

Go to Disk Management in Device Manager for those who have a TPM chip. To do this, press the Win + R button as usual and enter the run interface with the command ‘diskmgmt.msc’. Now click right on your hard disk and go to Properties.


How to install Windows 11 if you do not get TPM chip

Now go to volumes and check if your partition style is GPT. If MBR, you should need to convert the hard drive to GPT mode. It will be better to re-install Windows in GPT mode, as there is a risk of losing your data when converting.


img


If the boot style of your hard drive is in GPT mode and the TPM chip is enabled, then your PC is supposed to be ready for Windows 11 updates.


First, go to Windows settings. Then Go to Update & Security then click on Windows Insider program. Click Get Started If you haven't already joined the Insider program.

If you haven't already joined the Insider program, 

Now click on Link An Account and sign-in with your Microsoft account. Once signed in,then select Dev Channel in the next window and confirm.


img

Also click confirm in the next window.


img

Then restart your PC.


img

After restarting, go to Settings again, go to Update & Security and enter Windows Update. Then click on Check for Updates.


img

It will take some time while loading then your desired Windows 11 will start downloading.


img 

Go to settings and select Windows Update from the left side,If you don't want to get the preview build anymore.

img

Then go to the Insider program and click on 'Stop Getting Preview Builds' and then click 'Unroll This Device Immediately'.


img

Now you need to install Windows 10 anew before updating from settings. However, beta versions usually have some bugs. Wait for the full version of Windows 11 to avoid these problems.

Post a Comment (0)
Previous Post Next Post